How to Measure Your Kitchen | Kitchens 4U Online
Free Measuring Guide

How to Measure Your Kitchen

A simple, step-by-step guide to taking accurate kitchen measurements — so your replacement doors, cabinets or full kitchen order fit perfectly, first time.

4Easy Steps
20–30Minutes Needed
1st TimeFit Guaranteed

Getting your measurements right the first time

Whether you're ordering made-to-measure replacement doors, flat pack cabinets, or a complete new kitchen from us, accurate measurements are the difference between a perfect fit and a costly delay. This guide walks you through exactly what to measure, in what order, and the small details that are easy to miss — so when you send your plan to our team, we can turn it around quickly and correctly.

Tape Measure

Metal, min. 5m

Pencil & Paper

For your sketch

20–30 Mins

Take your time

Squared Paper

Optional, helps scale
1
Start Here

Sketch your room and take wall measurements

Start with a rough top-down sketch of your kitchen — it doesn't need to be to scale. Walk the room and note each wall length in millimetres as you go, along with your ceiling height.

  • Sloped ceiling? Take the measurement at both the lowest and highest point.
  • Measure the ceiling height in two spots on opposite sides of the room, as older properties often aren't perfectly level.
  • Note any chimney breasts, alcoves or awkward corners directly onto your sketch as you go.
3600mm 2600mm Ceiling height: 2400mm
2
Openings

Add doors, windows and the space between them

Mark every door and window onto your sketch, then measure each individual wall section either side of them — not just the total wall length. This tells us exactly how much run you have for units and doors.

  • Record the windowsill height from the floor, so we can see what will fit underneath.
  • Note whether each door opens inwards or outwards, as this affects where units and appliances can go.
  • Double check your smaller measurements add up to the total wall length before moving on.
Window opening 900mm 450 900 (to corner) Door opening Dashed line = swings inward
3
Fixed Points

Mark existing services and fixed features

Add radiators, boilers, waste pipes, extraction points and electrical sockets to your sketch. These fixed points often dictate where sinks, hobs and tall units can practically go.

  • Don't worry if socket positions haven't been finalised — we can help advise on this.
  • Include the height, width and depth of any boiler, plus any pipework connected to it.
  • Note the height of existing sockets and switches from the floor, if you're keeping them in place.
Boiler Radiator Socket
4
Final Check

Photograph tricky areas and send everything over

If you have architect's plans, previous designs, or photos of the room, send these along with your sketch — the more context we have, the more accurate our advice and cutting will be.

  • Photograph any sloped ceilings, beams, pillars or awkward corners from a few angles.
  • A short video walking around the room can help us picture the space even better than photos alone.
  • Send your sketch, photos and measurements to our team via our Get a Quote page or by emailing us directly.
Photos + video help us plan tricky corners

Not confident measuring yourself? Send us what you have and our team can help talk you through the trickier parts over the phone — we'd rather ask a few extra questions upfront than get your order wrong.

Quick checklist before you send your measurements

Run through this list to make sure nothing gets missed

All wall lengths in mm, plus overall room dimensions
Ceiling height (measured in at least two places)
Position and size of every door and window
Windowsill height from the floor
Door swing direction (in or out)
Radiator, boiler and pipework positions and sizes
Existing or planned socket and switch positions
Photos or a short video of the room

Common measuring questions

What if I'm only replacing my kitchen doors, not the whole kitchen?

You'll still need accurate width and height measurements for every door and drawer front, taken from the existing cabinet openings. We'll guide you through this on our replacement doors pages, and our team can double-check anything you're unsure of before you order.

Do you offer a measuring or design service if I'm not confident doing it myself?

Yes — take a look at our Kitchen Design Service, where our team can help you plan your layout. You can also send through what you have and we'll flag anything that looks like it needs double-checking.

What units should I measure in?

Millimetres (mm) throughout, please — it keeps things precise and avoids any rounding errors that can creep in with inches or centimetres.

How do I send my measurements to Kitchens 4U Online?

Use our Get a Quote page to upload your sketch, photos and measurements directly, or email our team and we'll come back to you with next steps.

Ready to get your kitchen quote?

Send us your sketch and measurements and our team will help you plan your replacement doors, flat pack cabinets or complete kitchen — with unbeatable prices and a fast turnaround.

Get Your Kitchen Quote Contact Our Team
Scroll to Top